NDT Supply.com
7952 Nieman Road
Lenexa, KS 66214 USA
Phone: 913-685-0675
Fax: 913-685-1125
www.ndtsupply.com
Before using your Ultrasonic Cleaner, please read and thoroughly understand these safety
precautions. Failure to follow them may result in serious personal injury or property damage
.
To avoid electrical shock:
• Unplug from power source before filling or emptying the tank.
• Keep the control panel and the area around the cleaner clean and dry -- wipe up solution
which spills over the tank brim. Water and high voltage can cause electrical shock
.
• Do not operate the cleaner without proper grounding
.
• Do not remove the grounding prong on the line cord plug
.
• Do not disassemble your cleaner -- high voltage inside the cleaner is dangerous
.
• Do not immerse the cleaner in water.
To prevent personal and/or property damage:
• Operate the cleaner with a vented cover or no cover.
• Use water-based solutions
.
• Do not ever use alcohol, gasoline, or flammable solutions
.
Doing so could cause a fire or
explosion and will void your warranty
.
Use only water-based solutions.
• Do not ever use mineral acids. These could damage the tank.
• Do not touch the stainless steel tank or cleaning solution -- they may be hot.
• Do not allow fluid temperature to exceed 70°C (160°F).
• Do not place your fingers or hands into the tank while the cleaner is operating
.
Doing so
may cause discomfort and possible skin irritation
.
Avoid contact with solutions and provide
adequate ventilation
.
• Do not use solutions containing chlorine bleach
.
To prevent damage to the cleaner:
• Change your solution regularly.
• Do not cover vents on the housing.
• Do not operate the cleaner dry
.
• Do not place parts or containers directly on the bottom of the cleaning tank; use a tray or
wire to suspend items. Failure to comply may cause transducer damage and will void your
warranty.
• Do not allow the solution to drop more than 1½ inch from top of tank with heat or
ultrasonics on
.
Failure to comply may cause transducer and/or heater damage and will
void your warranty
. The fill line is 1” from top of the tank.
Introduction
