Nova Eclipse TG950 - Users Manual
44
10. M AINTENANCE
Normal maintenance consists of little more than keeping the gage
surfaces and probes clean. The probes and cables should be inspected
periodically, and replaced, if excessively worn.
Battery life depends upon the type, freshness, and quality of the batteries
used, and, to a lesser extent, upon some of the features used. If the
backlight is used extensively, battery life will be reduced. See Section 4.1,
Power On - Battery Check - Auto-Off.
To change batteries, loosen the large cap-screw on the bottom of the
gage with a coin or screwdriver. Remove the discharged batteries and
replace them with two new disposable AA-size alkaline or NiMH
rechargeable batteries. Install them with the positive (+) polarity inward.
Replace and tighten the battery chamber cap-screw. If the batteries are
completely discharged, removed, or replaced, re-establish calibration
settings. Other previous settings and logged data will be retained.
Nova Eclipse TG950 - Users Manual
45
11. SPECIFICATIONS
