See the charging curve full description (Page 9).
Follow this steps to start the charge:
1. Connect the
SMART
CHARGER
to the battery (P.5),
then plug the AC power socket. The power status led
will turn on.
2. If everything is ok
SMART
CHARGER
will start
charging directly.
Use the “
MODE
” selection button to switch between
auto, motorcycle, AGM, Lithium, charging curve.
When a charging curve is selected the process will
start.
3.
SMART
CHARGER
will check battery status before to
start. If the battery is ok the charge will start
normally (step 5), if not the device will try to recover
the battery (step 4).
4. If there’s something wrong with the battery
SMART
CHARGER
will try to recover it and the
rescue led will light up.
Rescue can take 30 to 120 minutes.
7
NOTE
If the ac power socket is connected before connecting the
clamps to the battery, the error led will be turned on
Connect the clamps to the battery then push the mode selection
button to restart the process.
MODE
AGM
LITHIUM
LiFePO
4
