NDS SMART-LINK SL 12-100, Руководство пользователя, Страница: 10 / 20

9. If the vehicle's alternator is a Smart Alternator - Euro
6, it is necessary to place the jumper (supplied) on
connector 8 or connector 9.
If the alternator is a traditional alternator (not Smart
Alternator) leave the two connectors 8 and 9 free.
10. Replace the plastic shell in place and tighten the
clamping screws to close the device.
8
1 2
NOTE
• Pin 8 and 9 both enable Smart Alternator mode.
Only one Jumper is needed, on connector 8 or
connector 9.
• Using both connectors (8 and 9) with a Jumper,
activates Smart Alternator mode.
• Leaving the two connectors 8 and 9 free from
Jumper activates the traditional alternator mode.
CAUTION
For power connections we recommend 25mm
2
cable
section minimum, or in any case, a section suitable for
the power required and the length of the cables
needed.
Fig.4
98