NDS 90Z0164, Руководство пользователя

Страница: 27 / 38

Power Modules | 21
Power Module Docking
Set the mounting slot on the bottom of power module
s
over the dock base tab, and tilt the top of the unit
forward into the locking cap at the top the dock. Press the power module against the locking cap until a click
indicates that the power module is locked in place.
The ZeroWire Mobile Stand automatically selects the active power module to supply power to the output. If a
depleted power module is removed for charging and a power module with available capacity remains installed,
the system will switch to the remaining power module with uninterrupted discharge.
Power modules can safely be installed into or removed from stand docks at any time without powering off the
unit.
Warning: To prevent a system shutdown when replacing a discharged power module, ensure that you are
removing the discharged unit and not the actively discharging unit.
Power Module Undocking
To remove a power module from a stand or charging station dock, press the release button on the locking cap,
tilt the power module back and lift it from the dock.
Mounting
Slot
Base
Tab
Locking
Cap