NDI NewTek NVG1, Быстрый старт

Страница: 13 / 19

2.1.4
CHECKING THE OUTPUT
1. Punch up the switcher inputs assigned to the NVG1 outputs on the PGM bus of the NewTek live
production system and recall graphics on Trio by clicking on them in the list and pressing the Play button
above the Preview window in the Trio user interface
2.1.5
CHECKING CONTROL COMMANDS
Control of Viz Trio via NewTek Macro triggers is common and useful for many production workflows.
NewTek macros can embed the Viz Trio macro language. Through this function it is possible to script many
of the operations that are normally done in the graphical user interface of Viz Trio.
Before sending commands, it is required to make certain the channel names are configured correctly.
The Viz Trio channels must match the channel name of the NDI input. You can verify the names by looking in
the bottom left corner of the Trio Interface.
If the names do not match, you can edit them by going to Trio ‘File’ menu and selecting ‘Configuration’. In the
window that appears, select ‘Output’ on the left side of the window. The channel(s) will be listed. Change any
channel name by right clicking and choosing ‘Edit Channel Name’ from the context menu.
The correct channel name will be the hostname of the NVG1 followed by a ‘-1’ or ‘-2’ for the each of the Viz
Engine NDI output channels. You can also see these names by going into the NewTek Switcher, opening the
input configuration window and looking at the Source selection. The name between the parentheses will be
the correct channel name.