NDD easyone pro Скачать руководство пользователя страница 97

Страница: 97 / 188

EasyOne Pro™ / EasyOne Pro™ LAB

Quality Messages and Quality Grades

5.6 Retrospective Test Assessment, Entering Comments

Note

You must be logged in as a user to be able to enter a test
assessment and comments.

Changing the Trial Acceptability

The trial acceptability and ranking of tests can be changed retrospectively.
This means that you can make tests unacceptable that the system judged
acceptable and vice versa. You can also change the trial ranking (rank 1, 2 or
3).



Click

(Fig. 5-2).

The test assessment icons

appear on the test results screen.

Follow these steps to make a test acceptable that the system judged unac-
ceptable:



Click the

icon.



In the ensuing window, select the

Acceptable

check box.

Fig. 5-2

Changing the trial acceptability

Fig. 5-3

Changing the trial ranking

Содержание easyone pro





























































































































































































Результаты поиска

Содержание easyone pro

Отзывы:

NDD easyone pro, Руководство оператора, Страница: 97 / 188

Результаты поиска

Содержание easyone pro

Отзывы: