LaserSpeed Pro 8500-4 Instruction Handbook: RS-232/RS-422 Communication
6-11
Example: If a calibration product of length 1000m is run through the gauge and it
measures 999m due to an alignment error, the trim adjustment should be set to:
10010
999
1000
10000
10000
C
Measured
Actual
C
The command
C10010<CR>
would set the value to the 100.10%.
Note: Changing this setting will cause a reset, will reset the indicated length, and will
cause the pulse outputs to be momentarily interrupted. Do not change this setting during
normal operation.
D
D<CR>
Read
Response Format:
<N>
D<N><CR>
Set
Factory Default: 200000 Minimum: 0 Maximum: 2147483647
<N>
is the velocity value * 1000 corresponding to the full scale output of the 0-2V analog
output. The Analog Output is described in detail in the
When this setting is set to 0, the Analog Output represents the Quality Factor on a 0-1V
scale.
When this setting is set to 1, the Analog Output represents the internal gauge temperature
(0-100°C) on a 0-1V scale.
Note: Changing this setting will cause a reset, will reset the indicated length, and will
cause the pulse outputs to be momentarily interrupted. Do not change this setting during
normal operation.
N
N<CR>
Read
Response Format:
<N>
N<N><CR>
Set
Factory Default: 0 Minimum: 0 Maximum: 2147483647
Содержание BETA LaserMike LaserSpeed Pro 8500-4
