Press
SMART BAND B9
HOW TO REGISTER ANTI-THEFT ALARM
TH9s
Reg success
Press the button
A-EFT1
5. Turn on the TH9s Anti-Theft Alarm.
6. Press the right button on the TH9s twice.
7. Registration was successful when the display shows “Reg SUCCESS”.
1. Turn on the Smart Band B9 by pressing and holding the button for a few seconds.
2. Turn on the TH9's anti-theft alarm.
3. Press the button twice to activate register mode. The LED will flash red.
4. Switch through the channels by pressing the button once. You must press the
button briefly until the purple LED flashes. Note: The purple channel is the
anti-theft channel.
5. When the purple LED flashes, press and hold the button for 3 seconds until
the LED lights up continuously.
6. Press the button on the TH9s twice.
7. The registration was successful when the LED lights up again and the band vibrates.
