manualshive.com logo in svg

ND SatCom SKYWAN IDU 1070, Руководство пользователя

Продукт ND SatCom SKYWAN IDU 1070 - это вершинное устройство для сетей VSAT, обеспечивающее надежное и быстрое соединение. Пользователи могут скачать бесплатно руководство по эксплуатации на {веб-сайте}, чтобы узнать подробности о функциях и настройках данного оборудования.

Поделиться
Скачать
background image

2010-10-26

Network Design and Engineering Guide

63

General Carrier Design

TDMA Carrier Design with ’TDMA Calculator’

Table 2-5

Summary ’General Data Output’ Parameter

2.6.4

Area ’Data output per frequency channel’

The following carrier specific parameters are displayed in this section:

-

User data rate ’User data rate [kbit/s]’, symbol rate ’Symbol rate [kBaud]’ and frequency
bandwidth per carrier ’Frequency bandwidth [kHz]’. This is the main result of the calcula-
tion, as it determines how much data rate is available on this channel for IP and Frame Re-
lay based applications and as result how much space segment must be leased on the
satellite transponder.

-

Calculated minimal signal to noise ratio ’Eb/No [dB]’ and ’Es/No [dB]’ for the given modu-
lation and coding.

Channel TDMA structure parameter: ’Data slot length [base slots]’, length of the request subframe ’Length rqst. frame [time slots]’, length of the reference burst subframe ’Length ref. slot [time slots]’, channel gross container size ’Length gross container [byte]’, data slots ’Data slots per TDMA frame’ and total time slots per TDMA frame ’Data rate per slot ass.[bit/s]’ . 

-

The spectral efficiency values per carrier ’Efficiency [bit/symbol]’ and ’Efficiency [bit/s/Hz]’.

Length base gross container 
[byte]

Displays the size of the base gross container  of channel 1 with data 
slot length = 1, optimized for the specified traffic. 

Traffic is sent over satellite in coded gross container packages. A 
base gross container holds the traffic data plus some overhead (e.g.   
TDMA header, SLL header, signalling bursts ) before adding the For-
ward Error Correction (FEC) bits. 

Time base slot 

Displays optimized TDMA base slot time of the network in microsec-
onds.

Number request slots per 
base slot

Displays quantity of request slots that could be placed in one base 
data slot.

Total user data rate [kbit/s]

Displays calculated available data rate for the user applications for all 
channels. 
User data rate per channel is derived as input from the traffic capacity 
calculation.

Total frequency bandwidth 
[kHz]

Displays total space segment size. Summary of all symbol rates x 
spacing factor of all channels

Total efficiency [bit/symbol]

Displays the average efficiency of all channels :
Efficiency = user data rate / symbol rate.

Total efficiency [bit/s/Hz]

Displays the average efficiency of all channel:  
Efficiency = user data rate / frequency bandwidth.

i

Current 

Sky

WAN

®

 software supports up to 256 time

 

slots per TDMA frame.

If this number is exceeded on any carrier, the solution is invalid and no out-
put results are given. 
An error message is displayed either in the stand-alone ’TDMA Calculator’
status line or in the ’

Sky

NMS Network Configurator’ Output window. 

i

If the request burst length is larger than one, additional user capacity may
be generated by increasing the superframe size.

Parameter Name

Definition

Содержание SKYWAN IDU 1070



























































































































































Отзывы:

Нет отзывов

Похожие инструкции для SKYWAN IDU 1070

OUMAN 3G-MOD5 Quick Start Manual preview
3G-MOD5
Бренд: OUMAN Страницы: 6
B&B Electronics ZP9D-115RM-LR Quick Start Manual preview
ZP9D-115RM-LR
Бренд: B&B Electronics Страницы: 2
SG Wireless SGW8100 User Manual preview
SGW8100
Бренд: SG Wireless Страницы: 6
Black Box CSU/DSU MS/DBU Manual preview
CSU/DSU MS/DBU
Бренд: Black Box Страницы: 101
AVM Fritz!Wlan Installation And Operation Manual preview
Fritz!Wlan
Бренд: AVM Страницы: 51
Go DGA0122 Quick Start Manual preview
DGA0122
Бренд: Go Страницы: 2
Comtrol RocketModem Hardware Installation Card preview
RocketModem
Бренд: Comtrol Страницы: 6
Comtrol RocketModem III Hardware Installation preview
RocketModem III
Бренд: Comtrol Страницы: 13
Wireless Matrix SDT-5000 Installation And User Manual preview
SDT-5000
Бренд: Wireless Matrix Страницы: 31
W&T 58620 Manual preview
58620
Бренд: W&T Страницы: 89
SMC Networks EZ Connect SMC8014 Install Manual preview
EZ Connect SMC8014
Бренд: SMC Networks Страницы: 34
O2 E173 User Manual preview
E173
Бренд: O2 Страницы: 24
SMC Networks SMCD3GN-RRR User Manual preview
SMCD3GN-RRR
Бренд: SMC Networks Страницы: 100
Micro-Aide LDM-1 plug-in User Manual preview
LDM-1 plug-in
Бренд: Micro-Aide Страницы: 48
CommScope SURFboard SBV3202 User Manual preview
SURFboard SBV3202
Бренд: CommScope Страницы: 50
2TEST TETRA DVI-100 User Manual preview
TETRA DVI-100
Бренд: 2TEST Страницы: 24
Zhone 6218-I2 Series Technical Specifications preview
6218-I2 Series
Бренд: Zhone Страницы: 2
Zhone 6212-I3-200 Specifications preview
6212-I3-200
Бренд: Zhone Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды