_______________________________________________________________________________________
_______________________________________________________________________________________
Page 6 of 20
2
Safety
Please note the enclosed sheet on the warning notes.
2.1
Intended use
The sensors of the Series 7000 are designed exclusively for measuring torque and/or speed. The respective
load range can be taken from the data sheet and must not be exceeded.
Proper use also includes compliance with the commissioning, assembly, operating, ambient and maintenance
conditions specified by the manufacturer.
Any use beyond these is considered improper. The manufacturer is not liable for any damage resulting from
such use.
2.2
Recalibration and duration of use
A factory recalibration should be executed annually. See the corresponding label on the sensor.
This recalibration can be carried out quickly and easily by NCTE AG.
Please contact us.
If the sensor is used within the limits of its intended use and regularly calibrated, the sensor's operating life
is unlimited.
2.3
Structural change
Unauthorized conversions or changes to the torque measuring system are prohibited for safety reasons and
lead to the immediate expiration of the warranty claims.
2.4
Training of the operating personnel
Assembly, commissioning and maintenance personnel must have read and understood the complete
operating instructions, especially Chapter “2 Safety". The operator is recommended to have this confirmed
in writing.
2.5
Transport and handling
During handling, storage and transport, make sure that the sensor is not exposed to strong magnetic or
electromagnetic fields (e.g. degaussing coils).
