email: [email protected]
- All data without guarantee, except technical modification -
Page 10 - 10
V17/02
NCTE torque sensors
Series 2300
Shaft coating
The shafts are protected on both sides with a film of anticorrosion wax. We recommend to leave the
protection permanent. As far as technologically needed, the coating can be removed with spirit / ethanol
Handling and transportation
By handling, storage and transportation keep the sensor away from magnetic or electromagnetic fields which
may exceed the maximal intensity defined from EMC (chapter technical characteristics) for instance
degaussing machines.
Precautions
Do not open the sensor housing under any circumstances.
Do not remove or loosen the locking rings on the shaft ends.
Do not loosen or tighten the flange-mounting nut of the socket-connector (chapter dimensions).
Use only a separate power supply for the sensor.
Use the sensor only according to the specification (chapter technical characteristics).
Service and maintenance
Recommended NCTE maintenance plan
12 month
Control of wiring, plug and shaft
12 month
Service-Hotline:
Phone: +49 89 66 56 19 17
Fax:
+49 89 66 56 19 29
Email: [email protected]
Disposal
For disposal the Sensor has to be returned to NCTE AG, Inselkammerstrasse 4, 82008 Unterhaching,
Germany.
