5
Clear Bluetooth Pairing
Your headphones automatically reconnects to the most
recently paired device when switched on.
If you want to change to other Bluetooth devices, or in
case of problems with pairing, do the following:
1.
Switch on the headphones, then press
G
M
twice
quickly.
2.
The headphones beeps to confirm disconnection.
LED turns from flashing blue slowly to rapidly
flashing red and blue.
3.
Press and hold
G
M
to turn off. When you next switch
on, the headphones no longer pair automatically.
Wired Mode
• Use the 3.5mm audio cable. Make
sure the headphones are switched off
to save power. A handy option when
your headphone battery power is depleted.
•
The stereo adapter can be used to connect to an
audio source.
¼” Stereo
Headphone Jack
