NCR Verifone UX100, Инструкции к набору, Страница: 4 / 25

1-2 Verifone UX100 and UX300 Devices
Installation Procedure
Warning: Disconnect the AC power cord before disassembling the Terminal.
Caution:
Static Electricity Discharge may permanently damage your system. Discharge
any static electricity build up in your body by touching your computer’s case for a few
seconds. Avoid any contact with internal parts and handle cards only by their external
edges.
To install the Verifone UX100 PIN Pad and UX300 MSR to the NCR Selferv™ 75 (7705)
Kiosk, perform the following steps:
1. Shut down the Software Application and Operating System.
2. Power down the Kiosk and unplug the power cord.
3. Remove the Front Panel, see the Removing the Front Panel section.
4. Install the Verifone UX300 MSR to the Front Panel, see the Installing the Verifone
UX300 MSR section.
5. Mount and Install the Front Panel Assembly to the Kiosk, see the Installing the Front
Panel section.
6. Install the UX100 PIN Pad, see the Installing the Verifone UX100 PIN Pad section.
7. Route the MSR and PIN Pad Cables and secure them to the Kiosk, see the Routing
the PIN Pad and MSR Cables section. For information on the connections of the
MSR and PIN Pad to the 7705 Kiosk, see the Interconnection Diagram section.