NCR SelfServ XK22, Руководство по подготовке площадки

Страница: 16 / 53

6 NCR SelfServ™ XK22 (2246) Site Preparation Guide
Electrical Requirements
Power Requirements
The Kiosk main power supply has a maximum output of 150 Watts and provides power
to the kiosk and its powered peripherals.
Mode
Power (W)
230V 60Hz 120V 60Hz
Windows Desktop Idle 38.8 39.5
Printing Receipt 77.1 77.9
Running Burn-In (not printing) 68.5 69.3
Running Burn-In (printing) 95.8 95.5
S3 – Sleep** 2.3 2.2
S5 – Off 1.4 1.35
Note: These measurements do not include any EMV pin pad.
** S3 – ACPI is set to S3. S3 uses Sleep command in Windows 10.
Range
Nominal
Vrms
Minimum
Vrms
Maximum
Vrms
Input Current
Maximum Arms
Low (115) 100–127 90 136 1.5 A
High (230 ) 200–240 180 265
AC Wiring Requirements
The customer must provide suitable AC power for the NCR SelfServ™ XK22 (2246)
Kiosk and any associated equipment and devices. NCR recommends a dedicated
unswitched power line dedicated to the NCR equipment installation. Refer to the
NCR
Workstation and Peripherals AC Wiring Guide (BST0-2115-23) for store AC wiring
requirements. The AC outlet must be installed near the kiosk and easily accessible to the
operator.