NCR SelfServ XK22, Руководство по подготовке площадки

Страница: 42 / 53

32 NCR SelfServ™ XK22 (2246) Site Preparation Guide
Recommended Bolt Specifications
In Countertop Mount installation, the kiosk must be bolted to the counter top. The
counter top construction determines the type of anchors to use: bolts and nuts, lag bolts,
screws, and so forth. The anchors are not shipped with the kiosk and must be obtained
locally.
NCR recommends to use the following bolt specifications for NCR XK22 Kiosk
Countertop Mount:
• Flanged Hex Head Bolt
• Thread size— M8 (5/16 in.)
• Length — 45 mm (1.77 in.)
Note: Longer bolts are required if the counter top board thickness is greater
than 25 mm (0.98 in.).
• Quantity — 4 pieces
• Steel Flat Washer
• Inside diameter — 8.4 mm (0.33 in.)
• Outside diameter — 16 mm (0.63 in.)
• Thickness — 1.4 to 1.8 mm (0.055 to 0.071 in.)
• Quantity — 4 pieces
• Serrated Flange Locknut
• Thread size — M8 (5/16 in.)
• Quantity — 4 pieces