NCR SelfServ Checkout 7350, Инструкция по эксплуатации

Страница: 6 / 20

2 7350 Narrow Core (R5N) Receipt Printer Upgrade
Installation Procedure
To install the Receipt Printer, follow these steps:
1. Turn off the NCR SelfServ Checkout software and hardware systems.
2. Unlock and open the Core Door. For more information, refer to Opening Core Door
on page 4.
3. Do any of the following:
a. If the unit is configured with an Uninterruptible Power Supply (UPS), turn off
the UPS and then unplug the power cable.
b. If the unit is not configured with a UPS, unplug the power cable.
4. Remove the existing Receipt Printer. For more information, refer to Removing Receipt
Printer on page 5.
5. Remove the existing Printer Shelf Assembly. For more information, refer to Removing
Printer Shelf Assembly on page 6.
6. Remove the existing Coupon Chute and Proximity Sensor. For more information,
refer to Removing Coupon Chute and Proximity Sensor Assembly on page 8.
7. Install the new Printer Shelf Assembly. For more information, refer to Installing
Printer Shelf Assembly on page 10.
8. Install the new Receipt Printer. For more information, refer to Installing Receipt
Printer on page 12.
9. Install the Coupon Chute and Proximity Sensor. For more information, refer to
Installing Coupon Chute and Proximity Sensor Assembly on page 13.
10. Attach the Printer Upgrade Label above the existing PID label, as shown in the image
below.