NCR S10 Скачать руководство пользователя страница 150 | Manualshive

Страница: 150 / 200

NCR S10 Скачать руководство пользователя страница 150

System Support Log
Hardware Records

D-8

NCR S10 Desktop Server User Guide

Hardware Records

This section is for recording and maintaining hardware
performance and service records. These records allow
the system user and support associates to get important
information to ensure successful operation of the
system.

To maintain accurate records, it is essential that

you complete all customer entry portions of the
appropriate log when placing a support call.

There are different ways to maintain hardware records.
Discuss these different types of logs with your account
support associate. Then, set up the logs according to
your company’s needs. The descriptions below give
examples of several recording methods.

One Log for All Service

Maintain one Hardware Log for all service performed
on the system, including the CPU, hard drives,
peripheral drives, plotters, printers, other components,
and peripherals. Record all preventive maintenance,
service notes, and updates in this log.

One Log for The System and a Separate Log for
Each Peripheral Device

Maintain one Hardware Log for repair service,
preventive maintenance, support notes, and updates
that apply only to the CPU and the entire system.

Note:

Different Types of
Logs

«
...
148
149
150
151
152
...
»

Содержание S10









































































































































































































Отзывы:

Нет отзывов