Memory Upgrade
3
3. The Motherboard contains two SODIMM sockets, stacked one on top of the other.
The sockets can be populated with any combination of the supported memory
module sizes (2 GB, 4 GB), 8 GB with a maximum of 16 GB total system memory.
1. To install a module, align it with the socket and push it into the socket (the socket is
keyed).
2. Press the module down until it latches in position. Ensure that the edges of the
module engage the latches and that the latches are completely engaged.
Note:
After powering up the terminal, re-flash the SPI/BIOS to ensure the latest
version is installed and verify that the terminal is fully functional (see the BIOS
Updating Procedures chapter in the NCR RealPOS XR7 User Guide (B005-0000-2332).
During this operation you will see a prompt for terminal model and serial number
information.
Important
: Model/Serial Number is mandatory.
3. Replace the Base Stand and Rear Cover assembly on the terminal.
