2
Installation Procedure
1.
Secure the Wall Mount Bracket (with arrow pointing up) to vertical surface using lag
screws (4). Make sure you install the screws into the studs or that you use hardware of
similar strength. Use the bracket as a template to mark the location of the holes or use the
dimensions shown below.
Note:
The recommended viewing height for the terminal is 1.2 m (48 in.) from the floor.
26727
130 mm
(5.1 in.)
199 mm
(7.8 in.)
120 mm
(4.7 in.)
140 mm
(5.5 in.)
59 mm
(2.3 in.)