7360-K710/K711/K713/K728/K729/K731 Attendant
Checkstand
3
3. Attach the skirt around the bottom of the Attendant Checkstand.
Note:
The side skirt panels of the Attendant Checkstand must be installed before
the front or back skirt panels. The illustration below uses the Full Size Attendant
Checkstand as an example.
a. Attach the side skirt panel to the side skirt bracket by aligning the open slots in
the skirt panel with the screw holes in the skirt bracket.
b. Secure the skirt panel to the bracket using two screws.
c. Adjust the skirt panel so that it is flush with the floor.
d. Tighten the screws to secure the skirt in place.
e. Attach the front or back skirt panel to the skirt bracket by aligning the open slots
in the skirt panel with the screw holes in the skirt bracket.
f.
Secure the skirt panel to the bracket using five screws.
g. Adjust the skirt panel so that it is flush with the floor.
h. Tighten the screws to secure the skirt in place.
Note:
Raising the Checkstand too high during leveling may cause the skirt to not
touch the floor when it is installed and adjusted. If the skirt does not touch the floor,
debris may accumulate under the unit.