NCR 7360-K502, Инструкции к набору

Страница: 34 / 38

Input Belt Adapter 34
Removing the Input Belt assembly
To remove the Input Belt assembly from a NCR SelfServ™ Checkout (7350) or
NCR FastLane SelfServ™ Checkout (7358) R6L Plus unit, follow these steps:
Note: This procedure shows theNCR FastLane SelfServ™ Checkout (7358) R6L Plus for
illustration purpose only.
1. Remove the Conveyor Belt from the Input Belt assembly. For more information, refer
to Removing the Conveyor Belt assembly on page 30.
2. Disconnect the Input Belt cable from the SelfServ Checkout unit. Depending on the
SelfServ Checkout unit, refer to the table below:
SelfServ Checkout Unit Cable Connection
NCR SelfServ™ Checkout (7350) EBox (Input Belt /Fan)
NCR FastLane SelfServ™ Checkout (7358) R6L Plus R6 I/O Box (Input Belt)
NCR SelfServ™ Checkout (7350)