5) Prepare the installation site. Mount the M5x20
screws or wall plugs on the wall using the
recommended dimensions shown on the sketch
at the bottom. Properly fasten the screws or
plugs to the wall stud.
6) Attach the printer to the wall. Ensure that the
printer is properly attached by checking if the
screws/plugs are properly inserted to the hook
slots on the wall mount plate.
Removal Procedure
1) Reverse the installation procedure.
Note:
When removing the wall mount paper guide,
hold the tab and pull outward to detach.
Hook slots
3.5 ~ 4 mm
(.138 – .160 in.)
Screw
128 mm (5.04 in.)
121 mm (4.75 in.)
Wall
Recommended Dimension:
