4
Care of the Control Unit
Installing the battery
•
Remove the back panel of the enclosure and
insert the battery with the plus (+) and minus (-)
poles pointing in the designated direction
.
•
Use one 9 Volt (PP3) battery. A rechargeable 9V
battery maybe used.
•
Remove the battery if the control unit will not be
used for a month or longer.
•
If the battery is incorrectly replaced, the control
unit may not function.
•
In the event of battery leakage, wipe the control
unit completely clean and install a new battery.
Cleaning
•
All surfaces of this system except the insoles
are non-porous and should be cleaned between
each client, using a disinfectant wipe
The Control Unit
What’s what?
Figure 1
Control Unit Front Panel
1.
ON / OFF switch
2.
INPUT socket
For connecting the two sensor pads via curly
cord and adaptor
3.
Headphone Socket
4.
Volume Control
5.
Low Battery LED
Battery needs to be
immediately
replaced or
recharged when red LED comes on.
6.
Speaker
7. 10 LED BAR DISPLAY
8. UPPER LIMIT
Dial to be used by therapist to establish upper
limit of target range -See FAQs to see how this
dial can be used for getting feedback when
target is reached
9
.
LOWER LIMIT
Dial to be used by therapist to establish lower
limit of target range.
8
9
0
2
3
4
5
6
1
7
3
RED
LED
bars
represent
LOWER
values
7
GREEN
LED
bars
represent
HIGHER
values
