Please make sure that the host computer and the Multi Box are connected correctly
before installing the drivers.
Xtenda Remote Management Console Installation
The peripheral device must be connected to the PCI card and the Multi Box in order to use the
Xtenda product before installing the driver and application program. And both hardware and
software must be installed to achieve the normal operation of the Xtenda product.
Each port of PCI card have to be installed separately. Therefore you have to installed the Xtenda
Graphic Controller in order to use all ports of PCI card.
When the computer start, “Hardware Update
Wizard” window is appeared.
1
After installing the PCI card drivers please
execute the Install.exe file which is located in
the CD-ROM drive.
1
Please click on the “Install Program” button.
2
The screen is prompted after turn off and on
the monitor of Host PC automatically for a
short time. Click the <Finish>button to
complete the graphic controller driver.
3
Insert the “Software Installation CD” into the CD-ROM drive and then install
the PCI card driver.
2
Completing the Xtenda Bus Enumerator.
3
Installation of a Xtenda PCI card driver
Installation of Xtenda Remote Management console
Installation of a Xtenda Graphic Controller
After installing Xtenda Bus Enumerator,
Prompted with the “Found New Hardware
Wizard” screen.
1
Install Xtenda Graphic Conrtoller.
2
Operating Systems supported by the Xtenda PCI card are as follows
Please input the password, which is designed
to prevent the unauthorized access to the
NCX-2000-XP remote management console
program.
3
The Operating Environment of the Computer.
Windows® 2000 Professional / Windows® XP Home Edition / Windows® XP Professional / Windows® XP Media Center Edition
(Changes may be made to the list of supported Operating Systems without prior notice.)
Screen Resolutions Supported
Resolution 1024 x 768 / 16 bit colors / Refresh rate 60 Hz
Resolution 800 x 600 / 16 bit colors / Refresh rate 75Hz
Recommended Specification for Using the Xtenda PCI card and the Multi Box
*HT : Intel® Hyper-Threading Technology
1 Xtenda PCI card
2 Xtenda PCI cards
- CPU : Intel Pentium4
2.4 ~ 3.8GHz with HT*
- Main Memory : 1.0Gbytes
or more
- CPU : Intel Pentium4
1.3 ~ 2.4GHz with HT*
- Main Memory : 512Mbytes
or more
For the registration of the Xtenda products
please input the serial number, the
activation key written on the back of the
Multi Box and other information.
4
A message window, which asks the user for their
intention to restart the system, appears when
the correct installation of the application
program is completed. After select the “Yes, I
want to restart my computer now.” Please click
on the <Restart> button.
5
The contents may vary depending on the specification of the products and may change
without advance notice.
Part No. 160-0116 Rev.A
