Citrix Ready workspace hub by NComputing (RX-HDX)
10
•
Exit the Windows session on the Citrix Ready workspace hub.
Session roaming with QR code authentication
To use session roaming with a QR code:
Launch a session on the mobile device.
Click the QR code scan button on the Citrix
Receiver toolbar to scan the QR code on the
Citrix Ready workspace hub.
The session starts roaming to the Citrix Ready
workspace hub.
Close the session using one of the following methods:
•
Use two fingers to swipe down on the Citrix Receiver main interface.
•
Close Citrix Receiver.
•
Exit the Windows session on the Citrix Ready workspace hub.
Screen casting with QR code authentication
To enable screen casting with QR code authentication, you must change the configuration on Citrix
Ready workspace hub’s settings page.
1.
Open
System configuration.
