E-PARTS OVERVIEW
13
NCM
LYON
Charging battery outside the bike
1. Unfold the frame first.
2. Take out the battery.
3. Connect the charger to the battery.
4. Connect the charger to an AC outlet.
5. Charging procedure can be stopped at any time.
6. Disconnect the charger from the AC outlet first and then from the battery.
7. Reinstall the battery and ensure that it is correctly aligned at the bottom.
8. Push down on the top of the battery until you notice a ‘click’ in order to ensure that the battery is properly secured.
9. Pull out the key.
10. Your NCM E-bike is ready for use.
Charging battery inside the bike
1. Connect the charger to the battery.
2. Connect the charger to an AC outlet.
3. Charging procedure can be stopped at any time.
4. Disconnect the charger from the AC outlet first and then from the battery.
5. Your NCM E-bike is ready for use.
4.2.5 Usage
Make sure you activate the battery by switch on the power button at the right side of cycling ward.
Turn on the display that is located on the handlebar, select the desired support level and begin pedaling.
You will notice that the motor starts as soon as you begin moving the pedals.
The charging time will be around 4 hours per one time. Please do not charge the battery for more than 10 hours at a time
(the battery will be fully charged much sooner).
A fall resulting in serious injury may occur if the following points are not observed:
1. Before you set off, hold the handlebar straight.
2. To get familiar with the bike and riding feel, begin with the motor turned off (you can set the support level to 0 on the
display). Do not switch the motor on until you are in motion.
3. Do not use the pedals to start moving until a safe and comfortable sitting position has been taken.
4. When navigating a tight curve or corner, apply the brake slightly to temporarily disable the motor and allow for a safe
turn.
The bicycle can be operated with the auxiliary drive support of the motor and without it. An empty battery will NOT render
the bicycle unusable.
When using the motor for pedal assistance, proceed as if using a normal bicycle; pressing down on the pedals will activate
the motor and further accelerate the bike.
