nclebo AID9836, Инструкция по эксплуатации

Страница: 12 / 20

Installation - DC12V Camera
1 Use the philips screwdriver to remove the screw (D).
2 Separate upper case (A) from bottom case (E).
3 Use philips scrwdriver to loosen screw (I) and remove gimbal (C).
4 Cut a hole in the ceiling for routing the cables.
5 Align the camera unit with the surface of the ceiling, make marks
on the ceiling in the places where the screw holes are to be drilled,
and then drill the four holes.
6 Pass the power cable (F) and video cable (G) from the camera unit
through the cable hole in the ceiling.
7 Align the four screw holes in the camera unit (E) with the screw
holes in the ceiling, and then secure the camera in place by
tightening the four or more screws (B).
8 Fix the gimbal (C) by using screw (I).
9 Carry out the settings and adjustments for the camera.
10 Adjust the dome liner (H) so that the dome camera's lens is visible
from the camera window, and then use a philips screwdriver to fix
the dome cover.
11 Connect upper case (A) and bottom case (E)
12 Tighten the screw (D).
D
A
E
I
B
C
F
G
H
D
A
E
I
B
C
F
G
11