GENERAL OPERATIONS
DSP OFF/ON
LOUD
OFF/ON
DEMO OFF/ON
BEEP
ON/OFF
SEEK
VOL LAST/ADJ
STEREO/MONO
DX/LOCAL
AREA EUR/USA
OTHER ADJUSTMENTS
Press MUTE button (4) to mute the sound. Press the mute button again to unmute the sound
and return to the previous volume level.
,Classic
07
16
DSP Mode OFF/ON
Pressing and holding this button will go to different modes:
Turn the volume knob to choose Flat, Classic, Pop or Rock.
Press the function button to select your favourite DSP mode.
LOUD Function OFF/ON
Turn the volume knob to either turn the Loudness On or Off.
(This feature used for in store demos). Press the volume button to select your choice.
DEMO Function OFF/ON
Turn the volume knob to either turn the Demo function On or Off.
(This feature used for in store demos). Press the volume button to select your choice.
BEEP Function OFF/ON
Turn the volume knob to either turn the Beep function On or Off.
Press the volume button to select your choice.
SEEK Mode
Turn the volume knob to either turn the Seek mode.
Press the volume button to select your choice.
STEREO/MONO Mode
Turn the volume knob to either select between Stereo or Mono audio.
Press the volume button to select your choice.
DX/LOCAL
Turn the volume knob to either turn the DX/Local modes.
Press the volume button to select your choice.
VOL LAST/ADJ
Turn the volume knob to set the volume to either to last volume level or set to a custom
volume level.
AREA EUR/USA
Turn the volume knob to select either European or USA radio frequencies.
Only change this if you are using the unit in a different country.
1.Pairing connection.
Turn on this unit and place your mobile near the unit, activate your mobile bluetooth
function. Soon the phone will find the new bluetooth device "CAR AUDIO" .
Input the pairing password “8888” and click OK. The phone will confirm if the
pairing is successful. When the pairing connection is successful, the LCD will
display BT ON, and the bluetooth logo “ ” will stop blinking .Then you may perform
the bluetooth operation.
REMARK: The headunit bluetooth system supports “HSP” “HFP” “A2DP” and
AVRCP bluetooth profiles. Check your mobile phone for it’s bluetooth capablities.
2.Handsfree phone service
If your mobile phone is paired with the unit, you can dial calls out through your
mobile phone. If there is a incoming call the head unit will switch to bluetooth mode
automatically
and the incoming call phone number will display on the LCD screen.
-Press the “BAND” button shortly to accept the call .Then you can talk with the
other party through the microphone on the front of the panel.
-Press “MUTE” button shortly to reject the call when calling comes in.
-Press “MUTE” button shortly to hang up after you finish talking.
3.Advance Audio distributing profile(A2DP) playing.
-Press button “ ”and “ ” in the panel can select the music track.
-Press “ ” button shortly to pause the music.
-Long press “BAND”(mode) to temporarily disconnect the bluetooth.
-Long press “BAND”(mode) button again to reconnect the bluetooth.
4. Interrupt bluetooth connection/reconnection.
Short press the “BAND” button to interrupt the bluetooth connection when
you are taking a call and the call then is handled by the mobile phone.
Press “BAND” button again to reconnect.
NOTE: Different mobile phones have different responses.
We do not guarantee all the operations of connectable devices.
5. Phone number book.
This bluetooth system can automatically store incoming call numbers, up to
10 phone numbers.
-Long press “MUTE”(mode) button to enter the phone number book and press
VOL button to look up the phone number.
-Press “BAND” button once can call out you desired phone number.
(If the mobile phone has the A2DP and AVRCP bluetooth functions)
After paired successfully, press the MODE button repeatedly to switch to
BT AUDIO mode.
BLUETO OT H
*CONTINUE OVER