9. Toggle power switch to " ", turning off power,
and cut labels near printer. Turn the lock ring knob
counterclockwise and remove. Slide the front label
stop plate to remove.
10. Slide label roll with cardboard core off label
rewinding shaft. Pull paper clip and remove to slide
off label roll, if using paper clip.
7. Toggle the rewinding switch to "Outside" (wind
labels facing outward) and the power switch to
"-" to power on, cycle through colored lights to
display pink.
6. Slide the front label stop plate on label rewinding
shaft leaving 1 mm space between the cardboard core/
edge of labels and the front label stop plate. Slide and
push the lock ring knob on the label rewinding shaft
and turn clockwise to lock front label stop plate in place.
8. Gently push the blue label press bar toward the
printer to start label rewinder. Label rewinder
automatically stops when labels are wound tight.
Move printer for labels to lay flat, if needed.
