NBS Technologies Javelin DNA, Руководство пользователя

Страница: 20 / 46

6. Click “Finish” to complete the installation process.
(2) If they are in the same IP range, but the printer cannot be found
Check “Input by user” and click “Setting” .
When the Network Configuration window pops up, the available printers will
be displayed.
5-3. Manual Installation (Connect to the printer using a USB connection)
(1) Retrieve Address via USB
Connect the printer to a PC using USB connection and click
"USB Get
Address" to check the device's IP Address, Subnet Mask, Gateway and MAC
address.
(2) Set Address via USB
Check the values retrieved through “ Retrieve Address via USB ”.
Enter the IP Address, Subnet Mask, and Gateway, and click "Set Address
via USB" .
Check the IP Address, Subnet Mask and Gateway and click "Setting" .
Check DHCP to enable DHCP mode and click “Setting” . If the settings are
entered correctly, the printer will initialize.
If the IP address and Board List are not specified in the Network Configuration
window, then they may be in a different IP address range or the printer is not
connected to the network. You will need to check your network settings.
If the printer is not automatically detected, connect to the printer using a USB
connection and configure the network settings.
38 39
JAVELIN DNA User Guide Manual