10
2 Overview
2.3 Button Operation and Mode Transitions
Operating the buttons on the front of the unit enables the output
shaft to be rotated or modes to be switched between.
2.4 About Each Mode
Mode Name
Description
Normal Mode
Standby state before setup execution.
Manual Operation
Mode
Pressing the A button will cause the output shaft
to rotate clockwise (CW direction).
Pressing the B button will cause the output shaft
to rotate counter-clockwise (CCW direction).
Select Mode
Select whether to perform unit
registration wirelessly or by wire.
Wireless Unit Registration Mode Puts the unit into wireless unit search standby state.
Wired Unit Registration Mode Puts the unit into wired unit search standby state.
* For details, refer to the Dedicated Software (EPU-COM) Instruction
Manual.
Normal Mode
Select Mode
Manual Operation Mode
Wireless Unit
Registration Mode
Wired Unit
Registration Mode
Settings button
long-press or wireless unit
registration complete
Settings button
long-press or wired unit
registration complete
Settings Button
Long-Press (3 seconds)
When Settings button is pressed
or more than 10 seconds passes
since an operation
Settings Button Press
A Button Press
B Button Press
CW Direction
CCW Direction
Output Shaft
A Button
B Button
Settings Button
