4
1
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Insert five Casters (2) into Base (1), push hard until you feel or hear the Caster (2) snap into place.
STEP 2
Attach Arms (7L & 7R) to Seat Cushion (5) using three Flat Washers (8) and three Arm Screws (9) for each arm.
TIGHTEN ALL SCREWS COMPLETELY USING ALLEN WRENCH (13).
STEP 3
Attach Seat Plate (4) to Seat Cushion (5) with the arrow towards the front of the chair, using four Seat Plate Screws (10)
TIGHTEN ALL SCREWS COMPLETELY USING ALLEN WRENCH (13).
STEP 4
Attach Back Support (12) to rear of Seat Plate (4) using three Back Support Screws (11),
TIGHTEN ALL SCREWS COMPLETELY
USING ALLEN WRENCH (13).
STEP 5
Insert Pneumatic Cylinder (3) into Base (1), Place the assembled seat on top of Pneumatic Cylinder (3) and apply downward pressure.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
NBF ® Signature Series November 2015
529-MM3T1N1F5 / 529-T11N1F5 / 529-T11P91F5
VERTICAL MESH BACK CHAIR w/ MEMORY FOAM SEAT
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
STEP 4
STEP 5
STEP 3
2
12
7R
1
3
8
9
X3
X3
11
X4
X5
4
5
PART QTY
1.
Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
2.
Casters . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
3.
Pneumatic Cylinder . . . . . . . . . . . . . . . . . . .1
4.
Seat Plate . . . . . . . . . . . . . . . . . . . . . . . . . .1
5.
Seat Cushion . . . . . . . . . . . . . . . . . . . . . . . .1
6.
Back Assembly . . . . . . . . . . . . . . . . . . . . . .1
7.
Arms (7L & 7R) . . . . . . . . . . . . . . . . . . . . . .2
8.
Flat Washers . . . . . . . . . . . . . . . . . . . . . . . .6
9.
Arm Screws . . . . . . . . . . . . . . . . . . . . . . . . .6
10.
Seat Plate Screws . . . . . . . . . . . . . . . . . . .4
11.
Back Support Screws . . . . . . . . . . . . . . . .3
12.
Back Support (Pre-Installed) . . . . . . . . . . .1
13.
Allen Wrench . . . . . . . . . . . . . . . . . . . . . . .1
9
13
8
7L
10
13
5
13
X3
X3
X3
6