2
User Manual Module TM2400A
1
Generally
The module TM2400A is intended to be installed in NBB Controls & Components GmbH
systems only and it is not commercially available. The usage is in the industrial environment. The
further information, technical data, safety instructions and labeling are included in host manuals.
The label on the host contains the FCC ID and IC certification number of the module.
2
FCC Notes
Part 15.19
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Part 15.21 Statement
Changes or modifications made to this equipment not expressly approved by
NBB Controls & Components GmbH may void the FCC authorization to operate this
equipment.
Part 15.105 Statement
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own
expense.
