NBB Nano-media, Руководство по эксплуатации

Страница: 4 / 16

4
Standard scope of delivery
– Transmitter including carrying system
– Receiver with integrated mounting holes
– Integrated connection cable or adapter cable for receiver
The order confirmation and/or delivery note is binding for the actual scope of delivery.
Safety information
Even if you have already operated radio control systems, always read these operating
instructions before commissioning. Only these operating instructions include the latest
information about your NBB radio control system.
Please refer to the enclosed documents for explanations about the operating license.
Always observe the relevant work safety and accident prevention regulations. Only
trained and authorized persons may operate the NBB radio control system. The safety
features installed in the NBB radio control system must be checked regularly.
The NBB radio control system must be shut down immediately in case of failures.
The transmitter must be switched off using the EMERGENCY STOP switch or
STOP button. The connection cable at the receiver must be disconnected from the
connection (terminal) of the controlled system. The radio control system may only
be repaired by NBB or specialists authorized by NBB.
Disregarding these recommendations puts you and others in danger!
NBB refuses any warranty and liability in such cases. The radio control system is used
to control machines and transmit data. In explosive atmospheres or for the control of
machines for the transport of persons it may not be used, unless specifically authorized
by the manufacturer for this application. Any different use is prohibited and releases
NBB from any responsibility.
In the event of faults
Stop work immediately if a fault event occurs with the NBB radio control system!
Please note that even small faults can lead to extensive defects. Always contact your
dealer or NBB in the event of a fault. Do not attempt to repair the NBB radio system.
Nameplates
The nameplates specify transmitter and receiver type, serial number, frequency range
and approval for non-EU countries. Please always advise serial number for queries.
General information
Never expose the radio control
system to strong jet high pressure
cleaning equipment!