background image

21

Assist functions

Display has 2 differrent assist functions:
• 

Assist levels (1-5), choosable by using up/down buttons

• 

Walk/Push assist, is selected by using the push throttle

Push assist has a “Booster effect”. This means when the push throttle is activated, it 
overpowers the assist function. When throttle is released, you will automatically return to the 
previously selected assist level. It is possible to adjust the speed between 7 - 20 mph with the 
use of the push throttle.

The push throttle can also be used as “walk-assist” without the use of the pedals and regard-
less of the assist level setting. This function is, for example, used on hills and other rough 
paths. 

Setup of functions

To access the setup options press both the 

 and 

 for 3 seconds. 

The display will now shows a flashing 

“1”

 number which indicates the setting options for

trip odometer

. To reset this, press 

The display will now shows a flashing 

“2”

 number with a symbol 

 ,which indicate the 

setting options for the wheel size. To change this, press both

 og 

 to select the numbers to be changed.

 or 

 

can be used to select the correct number. 

NB!

 Incorrect wheel size can indicates a faulty 

output of speed.

Press on the “

” to chose between km/h and MPH. The display will now shows a flashing 

“3”

 

number, chose the prefered indication of speed by using the 

 og 

.

 
Save the settings by pressing both 

 and 

 for 3 seconds.

Your bike is now ready with the new settings!

Содержание Promovec





























Отзывы: