NAYATI NGWT 3-55 AM, Инструкции по установке, эксплуатации и обслуживанию

Страница: 16 / 25

Manual Instructions for Gas Wok Ring Table
NAYATI
AMICUS
16
1
2
3
4
5
•
Replacing Nozzle
a. Lift the Burner (1) about 10 mm and pull from mixing chamber (3)
b. Remove the fixing screw (2). This screw can be reach from below.
c. Remove the complete mixing chamber (3) by turn anticlockwise from the Nozzle.
d. Turn the pressure ring (4) from Nozzle. DO NOT lose the pressure ring.
e. Remove the screw (5) and take the complete Nozzle unit.
f. Remove the Nozzle from the Nozzle carrier and replace with the new one that suit to the
table depend to the country and gas type.
g. Fix the Nozzle with a non-hardening sealing tape.
h. Replace the burner by following instructions to opposite direction. Notice the Primary Air
Adjustment.
20140227