Nayar Systems Nearkey, Руководство по установке и настройке

Страница: 14 / 52

7. Users
Users will be able to access to the installation if they have access permissions. It requires that they
should be registered in Nearkey and they need to install the app. It can be done in two ways:
•
Searching Nearkey in the App Store or Google Play as indicated in section 3.2. Nearkey App.
•
Clicking on the download link they will receive in the email that new Nearkey users will receive
when an owner or administrator give them access.
First steps for new users:
1. Download the Nearkey app available in App store and Google Play.
2. Open the app and introduce the email in which we the permission or in which we are going to
be register.
3. Nearkey will send an email to the address you entered to verify the identity of the
user. Please check the email inbox and spam.
4. Press the enter button that will appear in the email, it will redirect you to the Nearkey app.
8. Nearkey reset
The reset of the device is used to restore Nearkey to factory settings, it removes the configuration of
the device including the ownwer, administrators and users of that lock. From the time of restart, the
lock must be reconfigured. Read section
3. First steps.
To restart the device we should:
1. Identify the configuration button. Please check section 2.6. Main view . T he Nearkey version v4.0
has the button located on the right side of the Bluetooth module.
2. Press the button with the finger or an element that cannot damage the device.
3. Press and hold the button for approximately 3 seconds. The configuration LED will emit a red
light, when this light goes out and the LED turns blue, stop pressing the button.
4. If the operation has been correct, the configuration LED will start flashing with blue light, if this
light does not appear, please repeat the process.
14