4.9. Setting work mode
The device has two working modes: as a GSM module or an autodialer. The
GSM mode
allows to
connect one or more autodialers through the FXS connection while the
autodialer mode
can work with
up to four CAN audio modules where GSR has the autodialer logic. In order to configure the device as
an autodialer it is necessary to indicate the
number of elevator cars
that connect to GSR in the
installation and they can be between 1 and 4. To select among the work modes must be sent one of the
following SMS:
12345,C:wmgsm
– GSM mode
12345,C:wmta:number_of_connected_elevator_cars
– Autodialer mode
If the SMS format is correct the response is:
[“OK”]
Nayar Systems
GSR - 1_en
Page 25 of 35