8
Press PTT button on the headset cable to initiate a call, and release to finish talk.
Calling process in situation of no more than 8 beltpacks
All beltpacks and base station could initial a call at any time and hear each other.
Calling process in situation of more than 8 beltpacks
The system supports up to 8 beltpacks and a base station to initiate calls
simultaneously. Everyone could hear each other clearly.
When there are 8 beltpacks calling at the same time, the 9th beltpack must wait
until one of them release PTT button.
The base station has the privilege to initiate a call at any time, and all beltpacks
could hear it.
Calling Status Prompt
When a beltpack initiates a call, a microphone icon will be displayed at the upper right
corner of the screen. It indicates that the beltpack is transmitting audio signal.
Receiving voice signals
When a beltpack is transmitting audio signal, other beltpacks will display the caller
beltpack ID at the bottom of the screens. The speaker icon at the upper right corner of
the screen indicates that the beltpack is receiving audio signal.
TALLY Function
When a beltpack receives PGM or PVW tally signal from video switcher, the screen will
thrn red or green to remind cameraman of the broadcast status of his or her camera.
The screen will turn red to indicate the camera is on broadcast state.
The screen will turn green to indicate the camera is on pre-broadcast state.
The screen will keep blue without tally signal
Maintenance and Cleaning
Please read the following contents carefully in order for smoothly operation, long
