Page 9
Page 2
LOCATION AND FUNCTION OF CONTROLS
1. OPEN Button(OPEN)
2. Power(POWER) button
3. CD SLOT
4. LCD DISPLAY
5. EJECT(EJECT) key
6.
7.
8. MODE(MODE) Button &
LOUDNESS(LOUD) button
9. Mute(MUTE) Button &
button
Volume up/menu up(+) button
Volume down/menu down(-) button
PAUSE,PLAY( )
10. Audio select(SEL) button
11. EQ (Preset Equalizer) Button
12. BAND(BND) Button & Track Repeat
13.
17. TRACK UP/FAST FORWARD
BUTTON( )
18. AUXILIARY INPUT JACK
ON/OFF(RPT) button
TUNING KNOB
14. STEREO/MONO Button & Track
INTRO ON/OFF (INT) button
15. LOC/DX Button & Track Random
ON/OFF (RDM) Button
16. TRACK DOWN/REVERSE
BUTTON( )
WIRING DIAGRAM
+
+
+
+
FUSE 7A
YELLOW
ANTENNA PLUG
CONSTANT B+
BLACK(GND)
WHITE
WHITE/BLACK
GREEN/BLACK
VIOLET/BLACK
GRAY/BLACK
GRAY
VIOLET
GREEN
FUSE 0.5A
-
-
-
-
BLUE AUTO ANT
RED R
WHITE L
FUSE 0.5A
IGNITION SWITCH
RED (B+)
RCA OUTPUT LINE
Note:
1. Make sure you use a speaker with 4 ohm load impedance
2. Make sure the auto antenna wire (Blue) does NOT come into contact with
the vehicle chassis.
CAUTION:
In order to protect power IC from being burnt out during installation the car stereo,
it is necessary to follow the steps below to connect the wires during installation:
Step 1: Connect the ground wire (
Black
);
Step 2: Connect all speaker wires and power antenna wire (
Blue
):
Left speaker
Right speaker
Front speaker:
White (+) White/Black (-)
Rear speaker:
Violet (+) Violet/Black (-)
Step 3: RCA Line Out (R-
Red
/ L-
White
).
Step 4: Connect Back up (
Yellow
) and Acc wire (
Red
)
Gray (+) Gray/Black (-)
Green (+) Green/Black (-)
FRONT
REAR
RIGHT
FRONT
REAR
LEFT
SPEAKER
SPEAKER
