Naxa NT-5001K, Инструкция по эксплуатации

Страница: 19 / 32

Basic Operation
Turning the TV On and Off
1. Insert the power cord plug into a polarized AC outlet.
2. Press button on remote control or POWER button on the LED TV.
3. Normal picture will be displayed on the screen after 6 seconds. If no signal input,
"No Signal" will be displayed on the screen.
4. If temporary POWER off is required, press button on remote control or POWER
button on the LED TV.
5. If you want to completely switch off the power for this unit, unplug the power cord
plug for this unit.
6. After switching off the unit, you should tum on the TV again at least 5 seconds later.
Status indication lamp
No light: In power on mode.
Red: In standby mode.
Auto power off
If there is no signal input in TV mode, the TV will automatically access the standby
state in about 30 minutes.
Memory before turning TV off
The settings of picture and the preset channels will be memorized at turning off the unit.
When being started up again, the unit will work according to the mode set before being
turned off.
How to turn the TV on or off
13