Naxa NSW-10 LifeForce+, Инструкция по эксплуатации

Страница: 6 / 22

Page 6 Naxa Electronics
Getting Started
What You’ll Need
To start using your Li Fitness band, you’ll need
the following:
• An internet connection
• A smartphone or tablet that has the following:
• Bluetooth 4.0
• Android OS or iOS
• A fully charged NSW-10
Charging the Module
The module contains all of the sensors and processors,
as well as a built-in rechargeable battery that will
need to be charged from time to time.
Use the included USB cable to charge the module.
1. Remove the main module from the fitness band.
2. Connect the small end of the cable to the USB port
of the module.
3. Connect the larger end of the cable to a USB power
source (e.g., a powered computer or laptop, a pow-
ered USB hub, a USB power adapter).
4. The charge indicator will flash red while the mod-
ule is charging. It will light a steady red when the
module is fully charged.
L L
To ensure optimal performance, fully charge
the battery the first time you use the band.
Removing the Module from the Band
You will need to remove the module from the band in
order to charge it.
1. Turn the band over so that the back is facing you,
2. Grip either end of the module at the point where
the band tapers to a thin strap.
3. Gently bend one end of the band away from you, as
if peeling the band apart. The module will pop free
from the band.
L L
Take note of the position of the indicator
LEDs when replacing the module in the band.