9
To listen to the AM / FM Radio:
1. Press the Source button until “RAD” is shown on the LCD display screen.
2. You can also select either AM or FM modes by using the Source button
on the main unit.
3. Turn the Tuning Knob to select your desired radio station.
NOTE:
The AM antenna is built-in to the cabinet of the unit. To improve recep
-
tion, you must move the entire unit until reception improves. It may be nec
-
essary to move the unit to a new location entirely (ex. near a window) for and
improved reception.
RADIO FUNCTION
443 unit. To do so, follow these steps:
1. Turn your Bluetooth device OFF and back ON to refresh the device’s Blue-
tooth memory.
2. Find the Bluetooth menu on your device and make sure the Bluetooth func-
tion is turned ON.
3. Press the Source button on the main unit until “BT” is shown on the LCD
display screen.
NOTE:
The “BT” icon will begin blinking until a device successfully pairs with
the unit.
4. On your external Blutooth device, begin a search for nearby Blutooth devic-
es.
5. Select “NAXA NS-443” from the devices list and click to pair.
6. If your Bluetooth device asks for a password, enter “0000” and the device
will pair with the NS-443 unit. The “BT” icon on the LCD display screen will
stop blinking.
7. If supported by your Bluetooth device, set the NS-443 as “authorized” in the
Bluetooth menu.
NOTE:
Most Bluetooth devices will automatically connect when in ranged
after an initial successful pairing. If you wish to unpair a device, you can either
use the Bluetooth menu on your Bluetooth device or press and hold the Play
/ Pause / Pair butto on the main unit. This will unpair the current device and
allow for anew device to be paired following the steps listed above.
BLUETOOTH® FUNCTION
