8
CLOCK ADJUSTMENT
To setup the time of the unit:
1. Connect the AC power cord (The following operation must be done in stand-
by mode).
2. Press the TIME/PROGRAM button to enter into time setting mode. The time
will flash on the LCD display.
3. Press the BACK or NEXT buttons to select the time format 12h or 24h to
adjust the time.
4. After setting the time, press the TIME/PROGRAM button to confirm.
5. Then you can set the hour and the minute with the same method of steps
3-4.
6. After setup the unit time, long press TIME/PROGRAM button to set the time
to working automatically, with the same method of steps 3-4.
1. Press the FUNCTION button to select the “RADIO” mode.
2. Tune to the desired station by pressing BACK or NEXT.
Manual Tuning: Press BACK or NEXT and then release within 1 sec.
Auto Tuning: Press the Play/Pause button to enter the automatic channel search
mode.
Preset Channel: (30 preset FM stations)
(1) Press the BACK or NEXT button to select the desired station.
(2) Press the PROGRAM button once and the MEMORY number indicator will
begin to flash on the display.
(3) Press the PRE-UP or PRE-DN buttons to select the desired station number.
(4) Press the PROGRAM button to save the station.
(5) Repeat steps (1) to (4) procedures for storing the rest of the stations.
3. After storing the stations, press PRE-UP or PRE-DN to play the selected fre-
quency.
4. Press [VOL-]or [VOL +] to adjust the volume level.
5. Extend the telescopic antenna to its full length while listening in FM mode and
for better reception.
6. Turn off the radio by pressing the FUNCTION button. Select any other mode or
press the power button to off the unit.
7. The preset memories will be stored even though the unit is switched off and on.
RADIO FUNCTION
