Naxa NRC-191, Инструкция по эксплуатации

Страница: 9 / 24

1.
3.
2.
BUILT-IN QI WIRELESS CHARGER
1.
2.
www.naxa.com
Page 9
When charging has completed, please
remove the mobile device from the unit.
Place a Qi supported mobile device on the
center of the charging surface as illustrated
below. The Qi inidicator light will display and
your mobile device should begin charging.
Check the mobile device’s charging status using
the charging icon displayed on the screen.
While in Radio Mode, press and hold the
CLOCK/MEM button as “P01” will flash on the
display.
Radio Station Preset
Once completed with your presets, short press
the CLOCK/MEM button to cycle through the
pre-set stations as they will display as “P01-P10”.
4.
Press the HOUR/SKIP- or MIN/SKIP- buttons
to select which preset number you want to
store the selected radio station. (P1 - P10)
Press the CLOCK/MEM button to confirm and
store.
Press the CLOCK/MEM then HOUR/SKIP- / MIN/
SKIP+ to cycle through the stored presets.
5.
You can also press the CLOCK/MEM then HOUR/
SKIP- or MIN/SKIP+ buttons to cycle through the
stored presets.