Naxa NPB-267, Инструкция по эксплуатации, Страница: 14 / 41

Page 14 Naxa Electronics
L
$ '*
+ %,+2
4
To disconnect an Bluetooth device from the
/ button
%,+24
To learn more about how to use the Blue-
refer to the instructions provided by the
device manufacturer.
AUX-In Operation
1. Connect the audio source to the boombox. Use a
3.5mm audio patch cable (not included) to connect
the 3.5mm output jack of the audio source to the
3.5mm AUX Input jack [14] found on the front of the
boombox.
2. Prepare the boombox. Press the FUNCTION button
[5] to select “AUX” mode, then lower the volume
level (turn the Volume dial [15] counter-clockwise).
3. Prepare the audio source. Start playback on the
device, then set the volume level of the device to
approximately 80% of its maximum.
4. ‰ [ __Š *
the Volume dial [15] to set the volume to a com-
fortable level.
L
"
5 7"
control the volume.