Naxa NPB-262, Инструкция по эксплуатации, Страница: 15 / 44

www.naxa.com Page 15
Aux Mode
Play audio from devices connected to the AUX IN jack
[8]. Connect a 3.5mm AUX cable to the AUX IN jack [8]
found on the front of the Boombox and it will switch
to AUX mode automatically. To exit AUX mode, discon-
nect the cable from the AUX IN jack [8].
1. Connect your audio device to the 3.5mm AUX IN
jack [8] found on the front of the unit with a 3.5mm
AUX cable.
2. Set the volume level of the connected audio device
to approximately 80%. Make additional adjust-
ments to the volume level by turning the VOLUME
dial [20] of the unit.
3. Control playback with your audio device.
MIC Jack Operation
Microphone input is available in all modes. You can
speak over playback in any mode, or simply stop play-
back to use the microphone by itself.
1. Connect your microphone to the 6.3mm MIC input
jack [7] found on the front of the unit.
2. Press the M.VOL + button [9] or the M.VOL - button
[10] to increase or decrease the microphone input
level.
Guitar Jack Operation
Guitar input is available in all modes. You can play over
music as a backing track, or simply play while music
playback is stopped.
1. Connect your guitar to the 6.3mm Guitar input jack
[18] found on the front of the unit.
2. Press the G.VOL + button [15] or the G.VOL - button
[16] to increase or decrease the Guitar input level.