Page 20
Naxa Electronics
23. Wall or Ceiling Mounting: The product should be mounted to a wall or
ceiling only as recommended by the manufacturer.
24. Heat: The product should be situated away from heat sources such as
radiators,heat registers, stoves, or other products (including ampli-
fiers) that produce heat.
FCC NOTICE
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the lim-
its for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful in-
terference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to ra-
dio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be de-
termined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
CAUTION ON MODIFICATIONS
Any changes or modifications not expressly approved by the grantee of
this device may void the authority granted by the FCC to operate the
equipment.
WARNING
This product contains lead, a chemical known to the State of California to
cause cancer and birth defects or other reproductive harm.
Wash hands
after handling.
CAUTION
This product is equipped with a polarized plug (one blade is wider than the
other blade) as a safety feature to reduce the risk of electrical shock. This
plug will fit into a polarized outlet only one way. This is a safety feature.
If you are unable to insert the plug into the electrical outlet, try reversing
the plug. If the plug still does not fit, contact a qualified electrician. Never
use the plug with an extension cord unless the plug can be fully inserted
into the extension cord. Do not alter the plug. Do not attempt to defeat
the safety purpose of the polarized plug.
NEC NATIONAL ELECTRICAL CODE
Dot not apply oil or petroleum products to this product.
GRAPHIC SYMBOLS WITH SUPPLEMENTARY MARKINGS ARE LOCATED ON
THE BOTTOM OF THE UNIT. USE OF ANY CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN THOSE HEREIN SPECIFIED
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
