5
RECORDING FROM THE RADIO
1.
Load a blank tape into the tape compartment and close the door.
2.
Set the FUNCTION switch to RADIO; Tune to required station by rotating the TUNING
KNOB.
3.
Press RECORD key to begin recording. RECORD key and PLAY key go down
simultaneously.
4.
Press STOP/EJ. Key to end recording.
5.
To hear what you recorded, follow instructions in PLAYING A CASSETTE TAPE.
NOTE: PAUSE FOR A MOMENT - Using the PAUSE key on the cassette deck instead of the
STOP/EJ. Key to momentarily interrupt recording gives you a much clear recording. Press
PAUSE key again to resume recording.
RECORDING FROM CD
1.
Insert a blank cassette tape into the tape compartment.
2.
Slide the FUNCTION switch to CD/AUX position.
3.
Load a CD and select the desired track you want to record.
4.
Press CD PLAY/PAUSE button to start playback. Press RECORD key to begin recording.
RECORD key and PLAY key go down simultaneously.
5.
Press PAUSE key to interrupt or edit recording. Press it again to resume recording.
6.
Press STOP/EJ. Key to end recording.
7.
To hear what you recorded, follow instructions in PLAYING A CASSETTE TAPE.
TYPES OF CASSETTE
Use only good quality cassettes (IEC TYPE 1) for making recordings. May be used to replay
other types of cassette but is unable to make proper recording on these more specialized tapes.
The use of C120 cassettes is NOT recommended in this machine.
PROTECTING RECORDING
Normally, anything recorded on the tape is automatically erased when new recording is made. It
is possible to protect your recording from accidental erasure by removing the tabs found on the
rear of the cassette.
When the cassette is held with the recorded side upper-most and exposed tape facing the front,
the protective tab will be found on the left rear of the cassette.
All pre-recorded cassette are protected in this way to prevent accidental erasure of the
commercial recording. “Protected” cassette will prevent the record button from being operated.
If at any time you attempt to record and find that this button will not depress, never force the
mechanism or it may be damaged. Check that a cassette has been loaded and that tab has not
been removed. Recording on a cassette from which the tabs have been removed can be done
by covering the tab openings with a piece of adhesive tape.
ERASE TAB
FOR SIDE “A”